AT-ART9XA
AT-ART9XA
AT-ART9XA

AT-ART9XA

Le prix initial était : €188.98.Le prix actuel est : €117.98.

Dual Moving Coil Cartridge (Non-Magnetic Core)

Description
  • Non-magnetic core moving coil cartridge offers superior spatial representation

  • Dual moving coils are aligned in an inverted V shape, providing high separation and wide response for clear sound localization and minimal distortion

  • Shibata stylus ensures accurate high and mid-low range reproduction, and the 0.28 mm diameter solid boron cantilever provides excellent response characteristics

  • Neodymium magnet and permendur yoke significantly increase magnetic energy

  • Redesigned coil armature provides an output voltage of 0.2 mV (1 kHz, 5 cm/sec)

  • PCOCC coils ensure high-fidelity transmission

  • Machined aluminum base supports both the magnetic circuit and the vibration system, ensuring excellent playback stability
  • Hybrid body of machined aluminum and high-rigidity plastic reduces undesirable parasitic resonance

  • Threaded cartridge mounting holes allow easy installation to a headshell or integrated tonearm
Plus d'infos
Cartridge & Stylus Specification Table
Cellules et diamants
Réponse en Fréquence20-50,000 Hz
Séparation des Canaux30 (dB at 1 kHz)
Angle de Piste Vertical20°
Vertical Tracking Force1.6-2.0 g (1.8 g standard)
Fixation du DiamantNude
Impédance de Charge RecommandéeMin. 100 ohms (when head amplifier connected)
Impédance de la Bobine12 ohms (1 kHz)
Résistance en Courant Continu12 ohms
Inductance de la Bobine2.5 µH (1 kHz)
Tension de Sortie0.2 mV (1 kHz, 5 cm/sec.)
Equilibre des Canaux en Sortie0.5 dB (1 kHz)
Type de DiamantShibata
Cantilever (levier porte-pointe)0.28 mm diameter solid boron
Compliance Statique20 x 10-6 cm/dyne
Compliance Dynamique10 x 10-6 cm/dyne (100 Hz)
MontageHalf-inch
Poids de la Cellule8.5 g (0.30 oz)
Dimensions17.3 mm (0.68") H × 16.8 mm (0.66") W × 25.0 mm (0.98") D
Accessoires FournisNon-magnetic screwdriver; 2 washers; cartridge installation screws (M2.6) (5.0 mm × 2, 8.0 mm × 2, 10.0 mm x 2, 12.0 mm x 2); protector; brush
Threaded HoleM2.6 x 2
NotesNote: moving coil cartridges require receivers or preamps with compatible inputs; their stylus assemblies are not field-replaceable.
Catégorie :, ,

Produits similaires